Franklin Sub Drive Solar Pak

Franklin Sub Drive Solar Pak

All SubDrive SolarPAKS include:
1 x Solar Pump, 1 x Solar Motor, 1 x Solar Controller, 1 x Flow switch.
100, 150 and 270 LPM pumps are supplied with 2" BSPMF external Check Valve
All threads are BSPP on Pump Ends, Check Valves and Flow Switches
Controllers are outdoor rated to IP56

 

 

High flow system for faster tank fill and significant water output

Proven motor and pump technology and reliability

Robust IP55, NEMA 3 drive enclosure minimizes impact of wildlife, insects, dust, and weather

DC and AC power inputs with auto-switching to generator back-up

Seven segment controller display shows real-time input watts and system status

Remote telemetry capability through a RS-485 continuous data port

MPPT – Max Power Point Tracking for maximizing efficiency of input power

Soft start feature prevents water hammer and increases system life

Allows use of new solar array or retrofit to existing array (subject to size and performance check

Simple installation and no required maintenance

Built-in diagnostics and protection

C-tick and UL approved

FPS ISO Pumps

FPS ISO Series

The FPS ISO pump is manufactured in Australia to the highest quality utilizing best engineered practice available. The pumps are designed for industrial and agricultural application utilizing highest grade of materials for demanding application. The superior quality and design provides reliability of operation with minimum maintenance. Designed and manufactured to internationally recognized ISO 2858 standard.

Applications

  • Irrigation
  • Water Transfer
  • Building Services
  • Pressure Boosting
  • Mining
  • HVAC

Features

  • Designed to comply with ISO 2858 standard
  • Back Pull out design. No pipe work dismantling for seal/impeller changes
  • Cast iron body casing with Bronze impellers and stainless steel shaft as standard
  • Bare shaft and frame mounted for direct coupling to electric motors, engines or pulley drives
  • Direct coupled to 2 pole and 4 pole IEC motor configurations
  • Designed for vertical centre line discharge. Suitable for horizontal mounting
  • Single or double Carbon ceramic mechanical seals. Balanced or unbalanced configuration.
  • Bearing housings fitted heavy duty deep groove ball bearings
  • All bare shaft pumps are fitted with greased for life bearings
  • Table 'E' flanges on suction and discharge

ED-EDV Sump Drainage Pumps

This rugged range of drainage sump pumps has been proven over time. With their all stainless steel construction, the ED and EDV drainage sump pumps are ideal for numerous pumping applications whether clean water, grey water or with heavy solids up to 35mm2. 
Available in single phase with 5 metre and 3 phase with float switch and 10 metre leads.

 

Construction

  • Single impeller submersible drainage sump pumps in chrome nickel stainless steel
  • ED; two passage impeller
  • EDV: free flow (vortex) impeller
  • Double shaft seal with interposed oil chamber

Applications

  • For clean, grey and dirty water, solids up to 35mm2
  • EDV models free flow impeller suitable for liquids with high solid content and filamentous particles
  • Cosntruction suitable for use in certain food industry applications

Operating Conditions

  • Liquid temperatures up to 35C
  • Minimum immersion depth is 250mm
  • Maximum immersion depth is 5 metres
  • Continuous duty (with submerged motor)

MH Pumps

The new MH Series, multi-stage booster pump is designed to meet your pressure boosting needs. The stainless steel construction offers high performance in a wide variety of applications.

 

Applications

  • Small domestic and industrial systems / Domestic water supply
  • Water distribution / Pressure boosting
  • Irrigation / Gardening / Sprinklers / Rainwater collection
  • Industrial plants / Wash down unit
  • Other various installations

Features

  • Compact close-coupled design, robust and rust resistant / Superior efficiency and performances
  • Heavy duty oversize motor shaft
  • Body, impellers and diffuser made of 300 series SS for maximum durability
  • Easy maintenance
  • Robust ball bearing fitted into the motor bracket for greater longevity
  • Single-phase models come with AU/NZ plug

Specifications

  • Capacities up to 14 m³/h at 50 Hz. Available in 3 flow rates: 3, 5 and 9 m3/h
  • Heads up to 10 bar, at 50 Hz.
  • Suction inlet 1.25" BSP MH 3/5 - 1.5" BSP MH 9
  • Discharge outlet 1" BSP MH 3/5 - 1.25" BSP MH 9
  • Maximum working pressure 10 bar
  • Maximum ambient temperature 40 °C
  • Liquid temperature range -15 °C to 110 °C
  • Asynchronous, TEFC, Class F insulation, IP55 protection motor
  • Capacitor inside terminal box
  • Single-phase motors with built-in thermal relay

MHQP Series

MHQP Combines an FPS MH pump with the versatile DrivE-Tech to give you the ultimate in constant pressure control performance, exceeding comparable products in the market. Available now in 5 and 9 m3/hr base performances.

 

Applications

  • Boosting
  • Water Transfer
  • Commercial Sprinkler Systems
  • Industrial
  • Residential Sprinkler Systems
  • Rainwater
  • Wash Down Units
  • Commercial Water Features
  • Tanks
  • Reverse Osmosis
  • Aeration

Specifications

  • Compact close-coupled design, robust and rust resistant
  • Asynchronous, TEFC, Class F insulation, IP55 protection motor 1 phase VSD with built in thermal protection coupled to a 3 phase motor
  • 300 series stainless steel on all hydraulic components
  • DrivE-Tech VFD by Franklin Electric
  • 10 amp 3 pin plug with 2 metre lead
  • Capacities up to 8 m3/h (MHQP5) and 15 m3/h (MHQP9) at 50 Hz
  • Capable of heads up to 7.5 bar at 50 Hz
  • Heavy duty oversized motor shaft
  • Suction Inlet - 1.25" BSP MHQP5, 1.5"BSP MHQP9
  • Discharge Outlet - 1" BSP MHQP5, 1.25"BSP MHQP9
  • Maximum working pressure 10 bar
  • Maximum ambient temperature 40 °C
  • Liquid temperature range from -15 to 110 °C
  • Easy maintenance
  • Made in Italy
  • Approved by Brisbane City Council
  • Complies with AS/NZS4020 Drinking Water

VR Series

The VR-Series Vertical Multistage pump features 3 versions of constructions all with stainless steel hydraulics for superior durability, efficiency and performance over a wide variety of applications including pressure boosting, reverse osmosis, water treatment and irrigation.


All VR models meet the 2015 European efficiency standards for pumps and motors. 

Rugged motor mounting with oversized ball bearings ensure long operating life in the toughest jobs, produced to AU/NZ market standards.

G version, materials; CI-304-316SS available in 30-45-65-95VR models
H (I) version, materials; 304-316SS available in 1-3-5-9-15-20-30-45-65-95VR models
N version, materials; 316SS available in 1-3-5-9-15-20-30-45-65-95VR models

 

Applications

  • Pressure boosting
  • Boiled feed
  • Water supply and treatment
  • Reverse osmosis
  • Wash down units
  • Hot/cold water circulation for HVAC systems
  • Irrigation

Features

  • Ratings: 1, 3, 5, 9, 15, 20, 30, 45, 65 and 95 m3/h
  • All stainless steel hydraulics for superior durability, efficiency, and performance over a wide variety of applications.
  • Rugged motor mounting with oversized ball bearings ensure long operating life in the toughest jobs. Heavy-duty motor bearing not required.
  • Standard equipment mechanical seal provides superior sealing between water end and motor
  • In-line suction and discharge with round flanges fit widest range of applications and provide convenient, compact installation.
  • Rugged IEC mount electric motors produced to AU/NZ market standards

4400 Tri Seal 4 Inch

The standard FPS 4400 4" submersible pump features the new TRI-SEAL floating stage system. This new stage system further improves efficiency and protects against wear when pumping abrasives like sand.

 

1, 1.5, 2, 3, 3.5 and 4 m³/h flow ratings

18, 25, 30, 45, 60 and 70 litres per min flow ratings

300 series stainless steel hub floats with the impeller maintaining a positive seal

Phenolic washer provides high efficiency performance and abrasion resistance

Celcon®* impeller provides high efficiency performance and abrasion resistance

Noryl®** diffuser and disc - proven abrasion resistant material

Floating stage design allows impeller to float independently

Removable, spring-loaded check valve

Maximum water temperature: 120 °F/49 °C

Ceramic shaft sleeve and rubber discharge bearing protect shaft and eliminate sand wear

Powered by Franklin Electric corrosion-resistant 4" submersible motor

SR Series 6 to 16 Inch Pumps

The FPS 6-16 Inch SR Series radial water pumps were designed specifically for municipal and industrial applications where high grade stainless steel is required. These pumps contain stainless steel impellers, a thick solid stainless steel shell to maintain alignment and heavy investment cast suction and discharge brackets. Designed to operate efficiently with Franklin Electric submersible motors, the FPS SR Series all stainless steel pump is equipped to handle the most demanding conditions.