Scala2

Overview

GRUNDFOS SCALA2 is a robust, composite, variable speed pump that adjusts performance according to water demand, providing constant pressure to all taps. The fully integrated pump includes a motor, tank, sensor, drive and non-return valve in one compact unit that is quick and easy to install. SCALA2 is self-priming, allowing for use from both above and below ground water sources and the water-cooled motor ensures quiet operation.

Applications

  • Household water supply
  • Pressure boosting from above ground rainwater or holding tanks
  • Pressure boosting from below ground water sources - eg. below ground tank or dam
  • Mains boosting

Features & Benefits

Variable Speed

The pump adjusts performance according to water demand, providing constant pressure to all taps regardless of variations in demand or inlet pressure.

Self-Priming

Ideal for pressurising water from above or below ground water sources with a suction lift of up to 8 metres and self-priming up to 4 metres.

Energy Efficient

The pump features a permanent magnet motor to help reduce power consumption while the frequency controller matches the power consumption with the required water output, also helping to conserve energy and reduce energy bills.

Simple Selection

One model to suit most domestic applications makes selection easy.

User Friendly

The easy-to-use control panel features LED indicators displaying power status, pressure setting and alarm indicator lights.

Protective Functions

To protect the pump and help ensure a long life, a range of protective features are incorporated into the pump such as; dry-run protection, anti-cycling alarm, auto-reset and maximum continuous operation time (30 mins).

Easy Installation

Quick and easy installation in just three steps; connect the pipes, prime the pump and plug into the power outlet.

Integrated Non-Return Valve

No additional non-return valve required - plug and pump solution.

CM Booster Self Priming

Overview

The Grundfos CM Booster Self-Priming is a compact booster pump designed for domesticand light industrial use. The booster unit consists of a robust multistage centrifugal pump and a generator friendly PM1 or PM2 Pressure Manager.The Pressure Manager allows the pump to startand stop automatically according to demand andprotects the pump from dry running. The CM Booster Self-Priming is the perfect solution if you are struggling with insufficient mains pressure,and can also be used with above or below groundwater sources.

Applications

  • Mains water pressure boosting
  • Rainwater supply from above ground water tanks
  • Rainwater supply from below ground water tanks
  • Rainwater supply from other below ground water sources - dams/rivers etc. 

Features and Benefits

Self-Priming

With a suction lift of up to 8 metres (self-priming up to 4 metres), the CM Booster Self-Priming is ideal for pressurising water from above or below ground water sources.

Robust design 

All wetted parts are made from high quality, corrosion resistant stainless steel to ensure the longest life possible.

User-friendly interface

The pump features a user-friendly interface with LED indicators displaying power status, pump running, alarm indication and pressure indication (excluding CMB-SP 1-36).

Protective features

The pump incorporates a range of protective features such as; dry run protection, thermal overload protection, cycling alarm and maximum continuous operation time - 30 mins (excluding CMB-SP 1-36) to protect the pump and ensure a long life.

Easy installation

The booster unit is a compact and adaptable solution, which makes it suitable for most installations. Simply connect the inlet and outlet and adjust the start pressure to suit individual requirements and you have a fully operational booster unit.

Integrated non-return valve

Non-return valve for backflow prevention.

CME Booster

Overview

A variable speed pump that adjust accordingly to water demand, resulting in lower running costs. All wetted components are constructed from high quality stainless steel ensuring, the water quality is not affected by pump materials. The pump will provide constant pressure at the tap (up to pump capacity), regardless of variation in demand or inlet pressure.

Applications

  • Mains water pressure boosting
  • Rainwater supply from above ground water tanks
  • Features and Benefits

  • Robust design

    All wetted parts are made from high quality stainless steel to ensure the longest life possible.

    Easy installation

    The CME Booster is very easy to install. Once the booster has been connected to the pipework, it is simply a matter of putting the plug into a socket, and the system is operational.

    Quiet operation

    The CME Booster operates quietly, at around 55 decibels, significantly quieter than most pumps currently available on the market.

    User friendly interface

    The user-friendly interface features LED indicators showing operational status and buttons for pressure adjustment.

    Protective features

    The CME Booster features dry run protection to automatically stop the pump if the water source runs out. The pump is also protected against any accidental overload by built-in thermal protection. These protective features help to ensure thelongest life possible.

SQ

Overview

The Grundfos SQ 3" submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements.

The SQ is a compact, 3" multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate. They guarantee a reliable water supply at all times.

Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 200 m.

If the SQ pump is connected to the Grundfos CU 301 control box, it enables the creation of a constant pressure water supply.

Applications

SQ/SQE pumps are suitable for both continuous and intermittent operation for a variety of applications:

  • Ground water supply – private housing, small waterworks, small irrigation systems
  • Liquid transfer in tanks
  • Pressure boosting
  • Environmental applications – remedial pumping or sampling
  • Garages and petrol stations.

Features and benefits

  • Dry-running protection
  • Permanent magnet motor with high efficiency
  • Wear resistance from floating impellers
  • Protection against upthrust
  • High flow velocity
  • Soft-starts reduce wear on motor
  • Over- and under-voltage protection
  • Overload protection
  • Over-temperature protection.

Additional features of the SQE

  • Variable motor speed controls (with connection to the CU 301)
  • Connection to the CU 301 for two-way communication.

SP

Overview

Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.  

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications

The pumps are suitable for:

  • Groundwater supply to waterworks
  • Irrigation in horticulture and agriculture
  • Groundwater lowering
  • Pressure boosting
  • Industrial applications.

Features and benefits

  • State-of-the-art hydraulics provide high efficiency and low operating costs
  • 100 % stainless steel inside and outside
  • Sand resistant
  • Resistant to aggressive water
  • Motor burnout protection
  • Dry-running protection
  • Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.